Language Selection

Get healthy now with MedBeds!
Click here to book your session

Protect your whole family with Orgo-Life® Quantum MedBed Energy Technology® devices.

Advertising by Adpathway

         

 Advertising by Adpathway

Raising Bioreactor pH Optimizes Bacterial Bioplastic Production From Volatile Fatty Acids

2 hours ago 8

PROTECT YOUR DNA WITH QUANTUM TECHNOLOGY

Orgo-Life the new way to the future

  Advertising by Adpathway

Biochemical engineering researchers investigating microbial bioplastic production have demonstrated that increasing bioreactor pH beyond standard neutral levels substantially reduces organic acid toxicity and boosts polyhydroxyalkanoate synthesis in the model bacterium Cupriavidus necator H16. Volatile fatty acids derived from biowaste valorization processes, such as anaerobic digestion and dark fermentation, represent abundant and inexpensive carbon substrates for biopolymer fabrication. However, the commercial utility of volatile fatty acid feedstocks has consistently been constrained by their pronounced biological toxicity toward microbial production strains. Because organic weak acids exist in a pH-dependent chemical equilibrium between dissociated and undissociated molecular species, their physiological impact changes dramatically according to the extracellular acidity of the culture medium. At lower pH values, volatile fatty acids occur predominantly in their undissociated form, allowing them to diffuse passively across cellular membranes into the neutral cytoplasm where dissociation releases excess protons. This intracellular acidification forces bacterial cells to consume metabolic energy through adenosine triphosphate-driven proton transport systems to maintain pH homeostasis, diverting vital resources away from cellular growth and biopolymer accumulation.

Historically, microbial cultivations of Cupriavidus necator for polyhydroxyalkanoate synthesis have been conducted at neutral or slightly acidic conditions around pH 7.0, protocols that were originally optimized for non-acidic carbon sources such as fructose, hydrogen, or industrial sugars. When applied to volatile fatty acids, these conventional settings expose the cells to elevated concentrations of undissociated acids that prolong initial lag phases, impair cell membrane integrity through hydrophobic interactions, and severely lower overall conversion efficiencies. In the newly reported study, investigators evaluated whether deliberate upward adjustments of extracellular pH could shift the thermodynamic equilibrium toward membrane-impermeable dissociated acid anions, thereby relieving cellular stress and unlocking superior synthesis rates. By utilizing an automated, multi-tiered experimental setup across microbioreactors and laboratory-scale stirred-tank bioreactors, the research systematically quantified how pH adjustments directly regulate volatile fatty acid uptake, cellular growth dynamics, and the biosynthesis of polyhydroxyalkanoate copolymers.

Initial baseline investigations focused on characterizing the specific growth kinetics of Cupriavidus necator H16 when cultivated on an aerated microbioreactor system supplied with a defined synthetic mixture of volatile fatty acids. This synthetic feedstock contained six common carboxylates representative of anaerobic digestate streams: acetic acid at 105 grams per liter, propionic acid at 135 grams per liter, butyric acid at 35.5 grams per liter, iso-butyric acid at 10.7 grams per liter, valeric acid at 18.5 grams per liter, and iso-valeric acid at 9 grams per liter. When initial volatile fatty acid concentrations remained at or below 2.0 grams per liter, the bacterial cultures displayed smooth, monophasic growth trajectories without prolonged lag intervals. However, raising the starting concentration above 2.5 grams per liter triggered pronounced multiphasic growth patterns characterized by intermediate lag phases between distinct replication periods. This multiphasic behavior was attributed to carbon catabolite repression mechanisms, during which the cells temporarily repress the uptake of less favorable fatty acids while adjusting inducible catabolic pathways, which separate the degradation of short-chain acids like acetate from beta-oxidation pathways required for longer-chain acids like butyrate and valerate.

The microbioreactor screening also revealed critical toxic thresholds that established rigid operational boundaries for subsequent bioreactor design. When the total volatile fatty acid concentration reached 7.0 grams per liter or higher, microbial replication was completely suppressed throughout the entire 220-hour observation window. This severe growth inhibition occurred at a concentration significantly lower than the individual inhibitory thresholds previously established for isolated acetic or propionic acids, demonstrating that complex mixtures of volatile fatty acids exert synergistic or additive inhibitory mechanisms against bacterial physiology. Peak specific growth rates in batch screening occurred at an initial volatile fatty acid concentration of 1.25 grams per liter, whereas concentrations above or below this level led to reduced replication speeds. For cultures subjected to starting concentrations of 3.0 grams per liter or greater, growth rates during secondary phases were markedly higher than during early phases, reflecting the gradual alleviation of acid toxicity as the total substrate concentration was metabolized over time.

To prevent the detrimental substrate accumulation and cellular stalling associated with multiphasic growth during larger-scale production, the investigators developed a closed-loop feeding strategy implemented in one-liter parallel stirred-tank bioreactors. Operating with a working volume between 1.0 and 1.2 liters maintained at 30 degrees Celsius and 20 percent dissolved oxygen saturation, the process employed a coupled pH-stat and dissolved oxygen stat control loop. The primary substrate addition relied on acidic volatile fatty acids to maintain reactor pH, theoretically replacing carbon at the rate of cellular consumption. However, because microbial uptake of ammonium ions continuously acidified the fermentation broth and counteracted substrate titration, the actual fatty acid level within the vessel gradually decreased. To compensate without triggering inhibitory acid spikes, a secondary pulse feed of neutralized volatile fatty acid stock adjusted to pH 6.5 was automatically injected whenever dissolved oxygen concentrations surged past 25 percent saturation due to carbon depletion. This automated strategy maintained average volatile fatty acid concentrations stably around a conservative target of 0.5 grams per liter, well below the critical 2.0 grams per liter inhibition threshold.

Bioreactor fermentations systematically mapped the influence of cultivation pH across a range spanning from pH 6.0 to pH 8.5. The experimental results demonstrated that microbial proliferation was sharply curtailed at acidic extremes and completely abolished at alkaline thresholds. At pH 6.0, the bacterium produced only 0.5 grams per liter of biomass by the conclusion of the initial growth phase, despite the total consumption of available ammonium within 48 hours. Although slow biomass accumulation at pH 6.0 eventually reached 7.6 grams per liter after 168 hours of extended incubation, the lack of temporal correlation between nitrogen disappearance and growth indicated uncoupled nutrient utilization. At the opposite extreme, cultivating the strain at pH 8.5 prevented detectable cell replication and biopolymer accumulation, despite observing passive ammonium uptake that required the addition of 30.9 grams of 4 molar sodium hydroxide for pH stabilization.

Within the permissive window spanning pH 6.5 to 8.0, extracellular pH exerted a decisive influence on bacterial growth kinetics and conversion metrics. The highest apparent specific growth rate was achieved at pH 7.5, where the culture recorded 0.21 reciprocal hours alongside an ammonium-depletion biomass concentration of 8.9 grams per liter. This maximum growth rate represented a 31 percent acceleration compared to standard neutral cultivation at pH 7.0, which yielded 0.16 reciprocal hours, and was 41 percent higher than the rate observed at pH 7.75, which registered 0.15 reciprocal hours. Similarly, the biomass yield based on consumed volatile fatty acids reached its absolute optimum at pH 7.5, attaining 0.58 grams of biomass per gram of substrate. This represented a 24 percent enhancement relative to the yield of 0.47 grams per gram obtained at pH 7.0, with statistical evaluations confirming that biomass yields from pH 7.5 to 8.0 were significantly superior to standard neutral reference conditions.

Theoretical thermodynamic modeling supported these observed physiological improvements by illustrating the physical dissociation shifts occurring across the experimental range. Utilizing the molar fractions of the individual volatile fatty acids, the researchers calculated a weighted mean pKa value of 4.82 for the synthetic feedstock mixture. Applying the Henderson-Hasselbalch equation revealed that at pH 6.0, undissociated acid molecules accounted for approximately 6.2 mole percent of the total organic acid pool. In contrast, raising the medium pH to 8.0 reduced the undissociated fraction to merely 0.07 mole percent. This calculated two-order-of-magnitude decrease in membrane-permeable acid species substantially relieved the energetic burden placed on cellular maintenance systems, thereby preserving intracellular ATP pools for biosynthetic replication rather than active proton extrusion.

While cellular replication reached its peak performance at pH 7.5, optimal biopolymer accumulation required a slightly more alkaline environment. During the subsequent nitrogen-limited production phase, maximum polyhydroxyalkanoate synthesis was documented at pH 8.0, yielding a final biopolymer concentration of 42.5 grams per liter and a substrate-specific product yield of 0.53 grams of polymer per gram of volatile fatty acid. This output marked a 19 percent improvement over the biopolymer yield of 0.44 grams per gram measured under neutral pH 7.0 conditions, while lowering the pH to 6.0 diminished polymer conversion down to 0.30 grams per gram. Yield differences between pH 7.5 and pH 7.75 remained within analytical margins of error, confirming that maintaining medium conditions between pH 7.5 and 8.0 consistently elevated fatty acid utilization for bioplastic formation compared to traditional neutral setpoints.

Monitoring the biomass-specific production rate over cultivation time provided additional mechanistic insight into bioprocess efficiency under differing acid conditions. Specific production rates gradually declined across all experimental conditions as intracellular biopolymer granules accumulated within the bacterial cells. However, this kinetic decline occurred much more rapidly at neutral pH 7.0 than at pH 8.0, causing the cells cultivated under higher pH conditions to maintain heightened biosynthetic activity throughout prolonged nitrogen limitation. Analysis of copolymer composition further revealed that 3-hydroxyvalerate fractions within the synthesized polyhydroxyalkanoate chains ranged between 23 percent and 31 percent across cultivations between pH 6.0 and 7.75. Although 3-hydroxyvalerate content was noticeably lower at pH 8.0, statistical tests found no continuous correlation between extracellular pH and polymer monomer ratios, indicating that membrane permeability variations among individual fatty acids did not fundamentally alter overall copolymer properties.

Collectively, the experimental findings demonstrate that decoupling the growth and biopolymer synthesis stages into a dual-stage pH control framework can substantially enhance industrial volatile fatty acid fermentation efficiency. Implementing a setpoint of pH 7.5 during the active cellular proliferation phase minimizes bioreactor occupation times by accelerating microbial growth rates, while shifting the vessel to pH 8.0 during the subsequent nitrogen-depleted accumulation phase maximizes biopolymer conversion yields from volatile organic substrates. By replacing standard neutral protocols with pH values tailored to counteract weak organic acid dissociation behavior, this bioprocess strategy provides an engineering solution to overcome raw substrate toxicity, lowering operating costs and accelerating the commercialization of sustainable microbial plastics from waste-derived streams.

Subject of Research: Microbial polyhydroxyalkanoate biosynthesis from volatile fatty acid mixtures under controlled pH conditions

Article Title: Increasing pH leads to more efficient production of polyhydroxyalkanoates from volatile fatty acids using Cupriavidus necator H16

Article References: Leonhardt, S., Achenbach, B., Tamang, P., Tovar, G. E. M., & Zibek, S. (2026). Increasing pH leads to more efficient production of polyhydroxyalkanoates from volatile fatty acids using Cupriavidus necator H16. Microbial Cell Factories, 25(1), Article 202. https://doi.org/10.1186/s12934-026-03135-2

Image Credits: AI Generated

DOI: 10.1186/s12934-026-03135-2

Keywords: Cupriavidus necator H16, Polyhydroxyalkanoates, Volatile Fatty Acids, Bioprocess Engineering, Bioplastics, pH-stat Feeding, Microbial Cell Factories, Bacterial Fermentation, Biomass Yield, PHA Accumulation, Substrate Toxicity, Fed-batch Cultivation, Weak Acid Dissociation, Cellular Metabolism, Biopolymer Synthesis, Fermentation Technology

Read Entire Article

         

        

Start the new Vibrations with a Medbed Franchise today!  

Protect your whole family with Quantum Orgo-Life® devices

  Advertising by Adpathway